First seen at DJI’s Airworks conference last December, the new iPad App makes its way to CES.
Ground Station Pro (or GS Pro) is an iPad app designed for professional operators to plan and control autonomous flights for DJI aircraft. Through the app’s concise, easy to use interface, complex flight missions can be planned with just a few taps. GS Pro was designed to improve workflow and dramatically increase efficiency in a wide range of industries, especially those in aerial mapping, architecture, precision agriculture and electrical inspections.
The 3D Map Area function allows the aircraft to generate efficient flight paths after the operator has set their required flight zone and camera parameters. The aircraft will then follow this route throughout its mission. The image data captured during these flights can be input into 3D reconstruction software to generate 3D maps, while the mission itself can be saved for re-use.
The Tap and Go Waypoint feature allow for up to 99 waypoints for each mission and each waypoint can have up to 15 consecutive actions, including aircraft rotation, gimbal pitch, start/stop recording, photo capture, and hover. A Virtual Fence increases safety and ease of use by locking the aircraft’s height and speed within a designated area. As the aircraft approaches the virtual fence, it will brake and hover to ensure it stays within the flight area.
Compatible with most DJI aerial platforms and Zenmuse cameras, the DJI GS Pro will serve as a powerful and convenient tool for many industries and give critical missions added accuracy and reliability. The GS Pro iPad app is free and available for download at the App Store.
For more info, visit: http://www.dji.com/ground-station-pro