By Ciara Byrne
Commercial drones are starting to be used for tasks like inspecting oil rigs and crops. But they still require a highly skilled human pilot, and even those that are semi-autonomous usually use prebuilt maps or access the data over a wireless link.
Researchers from the Swiss Federal Institute of Technology in Zurich are making drones more independent. They have demonstrated a small drone that can build its own 3-D map of an unfamiliar environment with minimal help from a human operator, and then plan its own routes around a space and its obstacles autonomously.
The Zurich team used a small quadrotor that weighs one kilogram, the AscTec Firefly, and equipped it with a stereo camera and sensors that report velocity, orientation, and gravitational forces. They tested their software by flying inside a former industrial site, a challenging setting featuring large ducts and other industrial equipment.
The drone needs some human help to get started in a new space. While an operator helps it make an exploratory flight around the new environment, the drone’s software builds a 3-D map by comparing data from its motion and orientation sensors with images from its camera.
Depth images from the camera are used to create a 3-D map; places the drone can’t fly are blocked out (see video). Once the map is complete, the drone can plan the most direct route possible to any target destination, flying around any mapped obstacles.
The individual mapping and sensor techniques have been demonstrated before, but not all together onboard an autonomous drone, says Wolfram Burgard, a professor at the University of Freiburg, Germany. “This brings the technology closer to real-world application in inspection and surveillance tasks,” he says. A paper on the new system was presented at the International Conference on Intelligent Robots and Systems last month. Burgard was editor-in-chief of the paper review board.
However, fitting all those mapping abilities into a small drone comes at a cost. With the computer and sensors on board, the drone used in the experiments could stay in the air for only seven minutes, as opposed to 15 minutes without the extra weight. Burri says that improvements to drone designs mean that this isn’t a significant problem, and that newer drones on the market could manage a flight time of around 20 minutes with the same payload.
He and the other researchers are now working to give their drone the ability to avoid collisions with moving objects that don’t appear on its map—for example humans or moving equipment.