Ellipse Series, a Brand New Family of Miniature Inertial Sensors: More Accurate & Robust for the Same Budget

LHH-ELLIPSE-N
Rueil-Malmaison, France, September 2nd 2014 – SBG Systems releases the Ellipse Series, a brand new product range of miniature inertial systems replacing the IG-500 Series. For the same budget, customers benefits from higher accuracy, advanced filtering and features inspired from high end inertial navigation systems.
At the Core of the Ellipse Series: Very Low Noise Gyroscopes & GNSS

After many years of success and thousands of sensors on the field, the IG-500 Series is being replaced by a brand new generation: the Ellipse Series. This new series of miniature inertial systems benefits from a new design, new sensors, new capabilities, and new algorithms. “We have selected state-of-the-art MEMS sensors, especially very low noise gyroscopes that greatly enhance Ellipse performance. We integrated cutting-edge GNSS receiver while keeping a small size,” declares Alexis Guinamard, CTO of SBG Systems.


More Accurate, More Robust, More Features, for the Same Budget
With the Ellipse Series, SBG Systems sets up new standard for miniature inertial systems. “Being the only one on the market to design both high-end and entry-level sensors, we are able to upgrade miniature sensors capabilities by injecting some advanced and proven filtering and features inspired from high end inertial navigation systems” adds the CTO. Additionally to higher accuracy, we added for the same budget an improved FIR and rejection filtering, robust IP68 enclosure, high output rate, RTK corrections, automatic alignment, etc.
An Amazing Dual Antenna Model Completes this Innovative Product Line
Weighting from 45 grams, Ellipse sensors are incredibly flexible. The Ellipse-A model provides 3D orientation and heave. For navigation, you can connect your own GPS with the Ellipse-E, or use the internal one by choosing the Ellipse-N model. The amazing Ellipse-D completes this state-of-the-art miniature sensor family. This model is a little larger than the rest of the series because it integrates a Survey-grade L1/L2 GNSS receiver with two antennas for unmatched heading and position accuracy.
High Performance for Unmanned Vehicles and Sophisticated Payload
Today for the same budget and size, unmanned vehicle manufacturers and integrators could enjoy an orientation accuracy multiplied by five. Unmanned system navigation is more reliable and sophisticated payload such as high end or scientific cameras, radar, antennas, or LiDAR are more accurately stabilized and orientated. Ellipse’s features perfectly match UAVs requirements such as low noise gyroscopes and DGPS corrections for a more accurate position. UGVs trajectory accuracy is enhanced thanks to the fusion of inertial, GNSS and odometer information. USVs benefit from additional heave performance, automatically adjusted to the wave frequency.

Ellipse Series Availability

ITAR Free Ellipse A, N, E models are available for order. The Ellipse-D model will be available on Q1 2015. Ordering information is available from SBG Systems representatives and authorized SBG Systems dealers.

For more information about the new Ellipse Series, please visit: http://www.sbg-systems.com/products/miniature-inertial-systems-overview
COMPANY PROFILE:
SBG Systems – Redefine Motion Limits… 
SBG Systems is a leading supplier of MEMS-based inertial motion sensing solutions. The company provides a wide range of inertial solutions from miniature to high accuracy. Combined with cutting-edge calibration techniques and advanced embedded algorithms, SBG Systems products are ideal solutions for industrial & research projects such as unmanned vehicle control, antenna tracking, camera stabilization, and surveying applications.